Only MR-04 EVO2. MR-03 EVO cars.
*this does not work on Readysets,
This programmer is designed to be used with AAA Batteries no more than 1.5vdc per battery.
6.0vdc operation only if you are using higher voltage LIPO or other voltages, it will short out the programmer
Our prayers have been answered! No more fumbling around with a laptop and some windows updates!
This standalone programmer lets you change all the settings on the fly! You plug it in and load it into programming mode at your finger tips. You can adjust all the settings you normally need to access by using the ICS programmer that Kyosho doesn't even make anymore.
This is a must have! You can change your reverse delay and even steering and punch settings!
An amazing game changer for the MINI-Z world!
Update 3/26/2025:
v2.72 firmware update:
https://drive.google.com/file/d/1En9oo66zOQPajC2uJwJ_eQGhfkftFxUX/view?usp=drive_link
Release info:
You can now adjust your punch from 0-100 instead of the limited 10 step increment.
Cancel the ST gyro mix and TH gyro mix settings, the default value of this setting on the PC software is 44 and 38,
Before updating to version V2.72, it is recommended to set the ST gyro mix to 44 and the TH gyro mix to 38 using the V2.6 or V2.71 version card to maintain consistency with the official settings.
All legacy settings for MR-03 EVO has not changed. Update only changes MR-04 EVO2 Programming.
===============================================
Update 3/23/2025:
v2.71 firmware update:
https://drive.google.com/file/d/1fRkMt1d1S-YaBUjH8emIHpEE1Ra0f4PT/view?usp=drive_link
Release info:
Updates your programmer to have the gyro mixing adjustments for
MR-04 EVO2.
===============================================
The operation upgrade steps are as follows:
