Language

Hot Searches

T plates mr03 driftart gl GT55 DriftArt2

Your position: Home > Electronics > SANWA FH5 4CH TOWER ANTENNA NANO GYRO RECEIVER WITH SHELL2 DSK-801 (Multi-color Optional) GT55racing

1/1

SANWA FH5 4CH TOWER ANTENNA NANO GYRO RECEIVER WITH SHELL2 DSK-801 (Multi-color Optional) GT55racing

Name: SANWA FH5 4CH TOWER ANTENNA NANO GYRO RECEIVER WITH SHELL2 DSK-801 (Multi-color Optional) GT55racing
Brand: GT55racing
SKU: DSK-801 BLACK
Price: 58.9 USD
Availability: InStock

SKU: DSK-801 BLACK

0.0 (0)

10 Sold

$58.90

Compatible Transmitters:
Sanwa M17
Sanwa MT-5
Sanwa MT-R

Received successfully

Coupon Code

CONTINUE SHOPPING

Quantity:

0 in stock

Add to Favorites (0)

Description

Description:
DSK-801 2.4GHz 4-Channel FHSS5 SSL Telemetry Receiver uses a tower antenna with exceptional range and response time. With a lightweight design and a small footprint, this receiver is great for Mini-z scale electric RC cars.

Features:
1. Sanwa 2.4GHz FHSS5U/FHSS5 Spread Spectrum System compatible
2. Compatible with SSL (SUPER VORTEX Series, etc...)
3. Ultra Response Mode (SUR)
4. Extreme Response Mode (SXR)
5. Dual ID system (able to bind with 2 transmitters)
6. Micro size (19mm x 12 mm)
7. Operating Voltage 3.5V - 8.4V
8. Weight: 3g

Indicator Function compatible:
Indicator function can be checked signal strength connected transmitter. The indicator function can be used for finding problems as incorrect receiver placing and finding the best receiver position for transmitter. Indicator function can be checked signal strength without any effect with response.

NOTE:
RPM sensor (SNW107A41061A) and temperature sensor are not compatible
RPM and temperature telemetry are only capable with the Sanwa Super Vortex series
FH5U RF mode is not capable to use telemetry
SXR response mode is only compatible with transmitter M17.

Compatible Transmitters:
Sanwa M17
Sanwa MT-5
Sanwa MT-R

Package Included:
1 x Receiver

Bind:
1.Turn on transmitter, enter [BIND] to be bind mode.
2.Connect BIND plug in BIND port then turn on receiver.
3.LED will change from slow flashing blue to fast flashing blue.
4.Turn off receiver, remove BIND plug, then turn on.
5.Finish BIND mode on transmitter.

GYRO sensitivity Adjustment:
The gyro sensitivity is controlled by CH3 value which could be adjusted on the transmitter. When the CH3 value is 50%, the sensitivity is zero. Turn CH3 value to 0% or 100% both can reach 100% sensitivity. Turn CH3 value to 0% or turn CH3 value to 100% will have different sensitivity curve. The GYRO provides 2 different optimized sensitivity curves for drifting.

Gyroscope EPA Adjustment:
First adjust (left and right steering) on the transmitter, the EPA value you need.

EPA (Travel) Setting (Gyro forward setting):
Press the "SETUP" button, turn on the GYRO. When the LED starts blinking fast, wait for the LED to blink slowly and the gyroscope is now in EPA (travel) setup mode, release the "SETUP" button. First turn the remote control to the left "EPA" position (the left end of the chassis) and stop there for a few seconds, when the left "EPA" position is saved in the gyroscope, the servo will automatically return to the middle position. Then turn the remote to the correct "EPA" position (right end position of the chassis) and stop there for a few seconds, when the correct "EPA" position is saved in the GYRO and EPA (drive) settings, the SERVO will automatically return to The middle position has been completed.

EPA (Travel) Setting (Gyro Reverse Setting):
Press the "SETUP" button, turn on the GYRO. When the LED starts blinking fast, wait for the LED to blink slowly and the gyroscope is now in EPA (travel) setup mode, release the "SETUP" button. First turn the remote control to the right "EPA" position (the right end of the chassis) and stop there for a few seconds, when the left "EPA" position is saved in the gyroscope, the servo will automatically return to the middle position. Then turn the remote to the "EPA" position on the left (left end position of the chassis) and stop there for a few seconds, when the correct "EPA" position is saved in the GYRO and EPA (drive) settings, the SERVO will automatically return to the middle position has been completed.
After the above settings are completed, please re-adjust the EPA value on the transmitter, and adjust the value according to the steering of your car chassis to the value you need.

CUSTOMER REVIEWS

0.0 0 Reviews

Write a review

Sign In

Language

Currency

SANWA FH5 4CH TOWER ANTENNA NANO GYRO RECEIVER WITH SHELL2 DSK-801 (Multi-color Optional) GT55racing

Quantity: